Greenlee NC-100 Manual de Instruções descarregar pdf (Página 6)

LCD Icons

The unit’s interface employs a high-contrast, backlit LCD panel to aid ease of use.

The icons are used in the following way:

1. Tel, Coax, Ntwk: Telephone,

Coaxial, or Network test mode is

selected.

2. Tone: Pair Tracing Tone is active.

3. Reversed: Polarity of telephone

pair is reversed.

4. Battery is low.*

5. Miswire: Wiring is not one-to-one.

6. Shield: Shield or screen is

connected.

7. Short: Some wires are short

circuit.

8. Digits showing wiremapping to remote unit.

9. Open: Some wires are open circuit.

10. Pass: All wires are connected one-to-one (correct).

11. Split: Split pair is detected.

12. VOLTS!: Voltage is detected on one or more pairs; testing is inhibited. Disconnect

quickly to prevent damage.

* The NETcat Micro requires one 9 V snap-type battery (alkaline types are recom-

mended). When the low battery icon is displayed, a few hours of typical use remain.

Using the unit with a low battery will eventually affect the accuracy of measurements.

1 2 3 4 5 6 7 8 9 10 11 ... 47 48

Sem comentários

Greenlee NC-100 Manual de Instruções Página 6